This is a VERY EASY piece to build so it is perfect if you are a beginner! Here’s how I built it! This plan is for a full size bed but it is very easy to adjust the measurements to accommodate another size. I started by making all of my cuts for my top and bottom frame. 

Then, I drilled all of my pocket holes with my Kreg Jig set for 1 1/2″ thick boards. I attached the top frame with 2 1/2″ pocket hole screws and did the same for the bottom frame. Next, I flipped the top frame over and attached the bottom frame to it with 2 1/2″ pocket hole screws. Read more here: